Mashed’s Top 3 Nespresso Gripes, and the Small Plate Behind Two

Weak shots, leaks and capsules that don’t get pierced properly are the three Nespresso complaints Mashed keeps hearing from owners, and two of them come back to the same small part.

That part is the diffuser plate, the round, waffled plate inside the brew chamber that the capsule presses against. Mashed’s Brittany Skyler says coffee oils and foil bits build up on it over time, which can choke the flow and leave you with a short, watery cup, or stop the machine brewing at all. Making hot chocolate or tea through the machine speeds that up. The suggested fix is a gentle scrub with a toothbrush, then the manufacturer’s troubleshooting steps if that doesn’t do it, rather than taking the machine apart. Mashed also notes that “weak” is sometimes just a low-intensity capsule.

For leaks, the article points first at the boring causes: a cracked water tank or a full drip tray. If those are fine, scale or debris inside the machine can push water out the bottom. Mashed quotes some unhappy owners of the roughly $700 Vertuo Creatista on that one.

The piercing problem is often a capsule seated wrong or a loose lever, per Mashed, but it also warns that stiff stainless steel reusable capsules can bend the piercing spikes on some machines over time.

Our take: a toothbrush and a descale fix more Nespresso problems than a service call does. Our Vertuo descaling guide walks through it, and if your machine is blinking at you, start with what the lights mean. Go easy with metal reusables.

More coffee pod news

All news